--> Operating Specifications-Gd Province Overseas Chinese Building & Decoration Co.ltd.

Welcome to Gd Province Overseas Chinese Building & Decoration Co.ltd.

HOTLINE：020-87348684  

logo

search
搜索
SAFETY MANAGEMENT

Governing Body

Announcement

Safe Education

Operating Specifications

Rules And Regulations

Safety Operation Rules for basket (ship)

1. In the construction management of the project, the crane basket (crane boat) shall be specially managed by the equipment personnel as a special construction facility. 2, construction and production of manned lifting basket (lifting ship), must have a certificate of quality, license, production license. 3. The basket (boat) must be in good condition, and the rated bearing capacity must meet the requirements of working load; It is strictly prohibited to use temporary and damaged baskets (boats) or baskets (boats) that do not meet the requirements after inspection.

查看详情

Safety technical operation rules for waterproofing workers

1. Persons suffering from skin disease, eye conjunctival disease and severe sensitivity to waterproof materials shall not be engaged in waterproof work. Intermittent time shall be appropriately increased for each class of waterproof work. 2, loading and unloading, handling, boiling, modulation, spread waterproof materials, must use the provisions of protective equipment, skin shall not be exposed. 3, liquefied barrels of waterproof materials, the first barrel cover and air hole all open, with iron bars, the party should be baked, and often dredge into the oil hole and air hole, fire and oil direct contact is strictly prohibited.

查看详情

Safety technical operation rules for painters and glass workers

1、各类油漆和其他易燃、有毒材料，应存放在专用库房内，不得与其他材料混放。挥发性油料应装入密闭容器内，妥善保管。2、库房应通风良好，不准住人，并设置消防器材和“严禁烟火”明显标志。库房与其他建筑物应保持一定的安全距离。3、用喷砂除锈，喷嘴接头要牢固，不准对人。喷嘴堵塞，应停机消除压力后，方可进行修理或更换。

查看详情

Safety and technical Operation rules for electricians

1. The installation and maintenance of temporary lines and electrical equipment on the construction site shall follow the Technical Specifications for The Safety of Temporary Power Consumption on the Construction Site and the organization design of temporary power consumption construction. 2, all kinds of electrical equipment and lines should not exceed the safety load, should be firm, good insulation and installation of safety devices, is strictly prohibited to replace the fuse with copper wire.

查看详情

Gas welding (cutting) safety technology operation

1. Welding and cutting operations belonging to the scope of first, second and third level fire must go through the procedures of fire application and obtain the fire license before operation. 2, before gas welding (cutting) should check the situation around the workplace, welding, cutting near the flammable and explosive items in the absence of cleaning or effective measures before, do not prepare for operation. No welding or cutting is allowed when there is conflict with open fire operation in the vicinity.

查看详情

Safety technical operation rules for electric welding machine

1, the welding machine should have a complete protective shell, one, two terminals should have a protective cover. The welding machine used on site should be equipped with a shed that can prevent rain, moisture and sun protection, and equipped with fire protection supplies. 2, when welding, welding and coordination personnel must take measures to prevent electric shock, falling, gas poisoning and fire accidents. 3, when welding copper, aluminum, zinc, lead and other non-ferrous metals, it must be carried out in a well-ventilated place, welding personnel should wear gas masks or breathing filters.

查看详情
< 1234 > 跳转到 页